Dumping 121 device(s) from the Global Device List: ------------------------------------------------- udi = '/org/freedesktop/Hal/devices/computer' info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list) info.callouts.add = {'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints'} (string list) info.callouts.session_active = {'hal-acl-tool --reconfigure'} (string list) info.callouts.session_add = {'hal-acl-tool --reconfigure'} (string list) info.callouts.session_inactive = {'hal-acl-tool --reconfigure'} (string list) info.callouts.session_remove = {'hal-acl-tool --reconfigure'} (string list) info.capabilities = {'cpufreq_control'} (string list) info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.CPUFreq'} (string list) info.product = 'Computer' (string) info.subsystem = 'unknown' (string) info.udi = '/org/freedesktop/Hal/devices/computer' (string) org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list) power_management.acpi.linux.version = '20070126' (string) power_management.can_hibernate = true (bool) power_management.can_suspend = true (bool) power_management.can_suspend_hybrid = false (bool) power_management.can_suspend_to_disk = true (bool) power_management.can_suspend_to_ram = true (bool) power_management.is_powersave_set = false (bool) power_management.quirk.vbestate_restore = true (bool) power_management.type = 'acpi' (string) system.chassis.manufacturer = 'Dell Inc.' (string) system.chassis.type = 'Portable' (string) system.firmware.release_date = '02/19/2008' (string) system.firmware.vendor = 'Dell Inc.' (string) system.firmware.version = 'A08' (string) system.formfactor = 'laptop' (string) system.hardware.primary_video.product = 10146 (0x27a2) (int) system.hardware.primary_video.vendor = 32902 (0x8086) (int) system.hardware.product = 'Latitude D820' (string) system.hardware.serial = 'GSNJLC1' (string) system.hardware.uuid = '44454C4C-5300-104E-804A-C7C04F4C4331' (string) system.hardware.vendor = 'Dell Inc.' (string) system.hardware.version = '' (string) system.kernel.machine = 'x86_64' (string) system.kernel.name = 'Linux' (string) system.kernel.version = '2.6.25.3-18.fc9.x86_64' (string) udi = '/org/freedesktop/Hal/devices/acpi_CPU0' info.capabilities = {'processor'} (string list) info.category = 'processor' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0' (string) linux.acpi_path = '/proc/acpi/processor/CPU0' (string) linux.acpi_type = 1 (0x1) (int) linux.hotplug_type = 4 (0x4) (int) processor.can_throttle = true (bool) processor.number = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/acpi_CPU1' info.capabilities = {'processor'} (string list) info.category = 'processor' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1' (string) linux.acpi_path = '/proc/acpi/processor/CPU1' (string) linux.acpi_type = 1 (0x1) (int) linux.hotplug_type = 4 (0x4) (int) processor.can_throttle = true (bool) processor.number = 1 (0x1) (int) udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' access_control.file = '/dev/snd/timer' (string) access_control.type = 'sound' (string) alsa.device_file = '/dev/snd/timer' (string) alsa.type = 'timer' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ALSA Timer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' (string) linux.device_file = '/dev/snd/timer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/timer' (string) udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' access_control.file = '/dev/sequencer2' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'OSS Sequencer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' (string) linux.device_file = '/dev/sequencer2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/sequencer2' (string) oss.device_file = '/dev/sequencer2' (string) oss.type = 'sequencer' (string) udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' access_control.file = '/dev/sequencer' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'OSS Sequencer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' (string) linux.device_file = '/dev/sequencer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/sequencer' (string) oss.device_file = '/dev/sequencer' (string) oss.type = 'sequencer' (string) udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' access_control.file = '/dev/snd/seq' (string) access_control.type = 'sound' (string) alsa.device_file = '/dev/snd/seq' (string) alsa.type = 'sequencer' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ALSA Sequencer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' (string) linux.device_file = '/dev/snd/seq' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/seq' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_5' info.capabilities = {'input', 'input.mouse'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Macintosh mouse button emulation' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_5' (string) input.device = '/dev/input/event0' (string) input.product = 'Macintosh mouse button emulation' (string) input.x11_driver = 'evdev' (string) linux.device_file = '/dev/input/event0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input0/event0' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_4' button.has_state = false (bool) button.type = 'sleep' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Sleep Button (CM)' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_4' (string) input.device = '/dev/input/event6' (string) input.product = 'Sleep Button (CM)' (string) linux.device_file = '/dev/input/event6' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6/event6' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3' button.has_state = true (bool) button.state.value = false (bool) button.type = 'lid' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'input.switch', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Lid Switch' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3' (string) input.device = '/dev/input/event4' (string) input.product = 'Lid Switch' (string) linux.device_file = '/dev/input/event4' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4/event4' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' button.has_state = false (bool) button.type = 'power' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Power Button (CM)' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' (string) input.device = '/dev/input/event5' (string) input.product = 'Power Button (CM)' (string) linux.device_file = '/dev/input/event5' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event5' (string) udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0' battery.charge_level.current = 80930 (0x13c22) (int) battery.charge_level.design = 86580 (0x15234) (int) battery.charge_level.last_full = 80930 (0x13c22) (int) battery.charge_level.percentage = 100 (0x64) (int) battery.charge_level.rate = 11 (0xb) (int) battery.is_rechargeable = true (bool) battery.model = 'DELL YD6237' (string) battery.present = true (bool) battery.rechargeable.is_charging = false (bool) battery.rechargeable.is_discharging = false (bool) battery.reporting.current = 7800 (0x1e78) (int) battery.reporting.design = 7800 (0x1e78) (int) battery.reporting.last_full = 7291 (0x1c7b) (int) battery.reporting.rate = 1 (0x1) (int) battery.reporting.technology = 'Li-ion' (string) battery.reporting.unit = 'mAh' (string) battery.serial = '1931' (string) battery.technology = 'lithium-ion' (string) battery.type = 'primary' (string) battery.vendor = 'SMP' (string) battery.voltage.current = 12927 (0x327f) (int) battery.voltage.design = 11100 (0x2b5c) (int) battery.voltage.unit = 'mV' (string) info.capabilities = {'battery'} (string list) info.category = 'battery' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'DELL YD6237' (string) info.subsystem = 'power_supply' (string) info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'power_supply' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Video Bus' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' (string) input.device = '/dev/input/event9' (string) input.product = 'Video Bus' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'evdev' (string) input.xkb.rules = 'base' (string) input.xkb.variant = '' (string) linux.device_file = '/dev/input/event9' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2d/input/input9/event9' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Video Bus' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string) input.device = '/dev/input/event8' (string) input.product = 'Video Bus' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'evdev' (string) input.xkb.rules = 'base' (string) input.xkb.variant = '' (string) linux.device_file = '/dev/input/event8' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:28/input/input8/event8' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Video Bus' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string) input.device = '/dev/input/event7' (string) input.product = 'Video Bus' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'evdev' (string) input.xkb.rules = 'base' (string) input.xkb.variant = '' (string) linux.device_file = '/dev/input/event7' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:22/device:23/input/input7/event7' (string) udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_AC' ac_adapter.present = true (bool) info.capabilities = {'ac_adapter'} (string list) info.category = 'ac_adapter' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Generic AC Adapter Device' (string) info.subsystem = 'power_supply' (string) info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_AC' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'power_supply' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/ACPI0003:00/power_supply/AC' (string) udi = '/org/freedesktop/Hal/devices/pnp_BCM0102' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PnP Device (BCM0102)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_BCM0102' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0e' (string) pnp.id = 'BCM0102' (string) udi = '/org/freedesktop/Hal/devices/pnp_SMCf010' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PnP Device (SMCf010)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_SMCf010' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0d' (string) pnp.id = 'SMCf010' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0501' info.linux.driver = 'serial' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '16550A-compatible COM port' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0c' (string) pnp.description = '16550A-compatible COM port' (string) pnp.id = 'PNP0501' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0' info.capabilities = {'serial'} (string list) info.category = 'serial' (string) info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501' (string) info.product = '16550A-compatible COM port' (string) info.subsystem = 'tty' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0' (string) linux.device_file = '/dev/ttyS0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'tty' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0c/tty/ttyS0' (string) serial.device = '/dev/ttyS0' (string) serial.originating_device = '/org/freedesktop/Hal/devices/pnp_PNP0501' (string) serial.port = 0 (0x0) (int) serial.type = 'platform' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0103' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PnP Device (PNP0103)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0103' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0b' (string) pnp.id = 'PNP0103' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Math Coprocessor' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0a' (string) pnp.description = 'Math Coprocessor' (string) pnp.id = 'PNP0c04' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT DMA Controller' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:09' (string) pnp.description = 'AT DMA Controller' (string) pnp.id = 'PNP0200' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_2' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'System Board' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:08' (string) pnp.description = 'System Board' (string) pnp.id = 'PNP0c01' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT-style speaker sound' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:07' (string) pnp.description = 'AT-style speaker sound' (string) pnp.id = 'PNP0800' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' info.linux.driver = 'rtc_cmos' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT Real-Time Clock' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:06' (string) pnp.description = 'AT Real-Time Clock' (string) pnp.id = 'PNP0b00' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' info.linux.driver = 'i8042 kbd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:05' (string) pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string) pnp.id = 'PNP0303' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13' info.linux.driver = 'i8042 aux' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PS/2 Port for PS/2-style Mice' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:04' (string) pnp.description = 'PS/2 Port for PS/2-style Mice' (string) pnp.id = 'PNP0f13' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_1' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'System Board' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:03' (string) pnp.description = 'System Board' (string) pnp.id = 'PNP0c01' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_0' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'System Board' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:02' (string) pnp.description = 'System Board' (string) pnp.id = 'PNP0c01' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PCI Bus' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:01' (string) pnp.description = 'PCI Bus' (string) pnp.id = 'PNP0a03' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'System Board' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:00' (string) pnp.description = 'System Board' (string) pnp.id = 'PNP0c01' (string) udi = '/org/freedesktop/Hal/devices/platform_vesafb_0' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (vesafb.0)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_vesafb_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/vesafb.0' (string) platform.id = 'vesafb.0' (string) udi = '/org/freedesktop/Hal/devices/platform_serial8250' info.linux.driver = 'serial8250' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (serial8250)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_serial8250' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/serial8250' (string) platform.id = 'serial8250' (string) udi = '/org/freedesktop/Hal/devices/platform_serial8250_serial_platform_1' info.capabilities = {'serial'} (string list) info.category = 'serial' (string) info.parent = '/org/freedesktop/Hal/devices/platform_serial8250' (string) info.product = 'Platform Device (serial8250)' (string) info.subsystem = 'tty' (string) info.udi = '/org/freedesktop/Hal/devices/platform_serial8250_serial_platform_1' (string) linux.device_file = '/dev/ttyS1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'tty' (string) linux.sysfs_path = '/sys/devices/platform/serial8250/tty/ttyS1' (string) serial.device = '/dev/ttyS1' (string) serial.originating_device = '/org/freedesktop/Hal/devices/platform_serial8250' (string) serial.port = 1 (0x1) (int) serial.type = 'platform' (string) udi = '/org/freedesktop/Hal/devices/platform_pcspkr' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (pcspkr)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/pcspkr' (string) platform.id = 'pcspkr' (string) udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt' info.linux.driver = 'iTCO_wdt' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (iTCO_wdt)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/iTCO_wdt' (string) platform.id = 'iTCO_wdt' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042' info.linux.driver = 'i8042' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (i8042)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/i8042' (string) platform.id = 'i8042' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' info.linux.driver = 'psmouse' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.product = 'i8042 AUX port' (string) info.subsystem = 'serio' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio1' (string) serio.description = 'i8042 AUX port' (string) serio.id = 'serio1' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input_0' info.capabilities = {'input', 'input.mouse', 'input.touchpad'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) info.product = 'AlpsPS/2 ALPS GlidePoint' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input_0' (string) input.device = '/dev/input/event3' (string) input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) input.product = 'AlpsPS/2 ALPS GlidePoint' (string) input.x11_driver = 'synaptics' (string) linux.device_file = '/dev/input/event3' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio1/input/input3/event3' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input' info.capabilities = {'input', 'input.mouse'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) info.product = 'PS/2 Mouse' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input' (string) input.device = '/dev/input/event2' (string) input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) input.product = 'PS/2 Mouse' (string) input.x11_driver = 'evdev' (string) linux.device_file = '/dev/input/event2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio1/input/input2/event2' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' info.linux.driver = 'atkbd' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.product = 'i8042 KBD port' (string) info.subsystem = 'serio' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio0' (string) serio.description = 'i8042 KBD port' (string) serio.id = 'serio0' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'hal-setup-keymap'} (string list) info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'input.keymap', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) info.product = 'AT Translated Set 2 keyboard' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' (string) input.device = '/dev/input/event1' (string) input.keymap.data = {'e005:brightnessdown', 'e006:brightnessup', 'e007:battery', 'e00a:suspend', 'e00b:displaytoggle', 'e00f:switchvideomode', 'e013:f23'} (string list) input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) input.product = 'AT Translated Set 2 keyboard' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'evdev' (string) input.xkb.rules = 'base' (string) input.xkb.variant = '' (string) linux.device_file = '/dev/input/event1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio0/input/input1/event1' (string) udi = '/org/freedesktop/Hal/devices/platform_dock_0' info.docked = false (bool) info.interfaces = {'org.freedesktop.Hal.Device.DockStation'} (string list) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (dock.0)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_dock_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/dock.0' (string) org.freedesktop.Hal.Device.DockStation.method_argnames = {''} (string list) org.freedesktop.Hal.Device.DockStation.method_execpaths = {'hal-dockstation-undock'} (string list) org.freedesktop.Hal.Device.DockStation.method_names = {'Undock'} (string list) org.freedesktop.Hal.Device.DockStation.method_signatures = {''} (string list) platform.id = 'dock.0' (string) udi = '/org/freedesktop/Hal/devices/platform_dcdbas' info.linux.driver = 'dcdbas' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (dcdbas)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_dcdbas' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/dcdbas' (string) platform.id = 'dcdbas' (string) udi = '/org/freedesktop/Hal/devices/dell_lcd_panel' info.addons = {'hald-addon-dell-backlight'} (string list) info.capabilities = {'laptop_panel'} (string list) info.category = 'laptop_panel' (string) info.interfaces = {'org.freedesktop.Hal.Device.LaptopPanel'} (string list) info.parent = '/org/freedesktop/Hal/devices/platform_dcdbas' (string) info.product = 'Dell Laptop Panel' (string) info.subsystem = 'unknown' (string) info.udi = '/org/freedesktop/Hal/devices/dell_lcd_panel' (string) laptop_panel.access_method = 'custom' (string) laptop_panel.brightness_in_hardware = true (bool) laptop_panel.num_levels = 8 (0x8) (int) udi = '/org/freedesktop/Hal/devices/dell_wwan_switch' info.capabilities = {'killswitch'} (string list) info.category = 'killswitch' (string) info.interfaces = {'org.freedesktop.Hal.Device.KillSwitch'} (string list) info.parent = '/org/freedesktop/Hal/devices/platform_dcdbas' (string) info.product = 'Dell WWAN Switch' (string) info.subsystem = 'unknown' (string) info.udi = '/org/freedesktop/Hal/devices/dell_wwan_switch' (string) killswitch.access_method = 'dell' (string) killswitch.type = 'wwan' (string) org.freedesktop.Hal.Device.KillSwitch.method_argnames = {'power', ''} (string list) org.freedesktop.Hal.Device.KillSwitch.method_execpaths = {'hal-system-killswitch-set-power', 'hal-system-killswitch-get-power'} (string list) org.freedesktop.Hal.Device.KillSwitch.method_names = {'SetPower', 'GetPower'} (string list) org.freedesktop.Hal.Device.KillSwitch.method_signatures = {'b', ''} (string list) udi = '/org/freedesktop/Hal/devices/dell_wlan_switch' info.capabilities = {'killswitch'} (string list) info.category = 'killswitch' (string) info.interfaces = {'org.freedesktop.Hal.Device.KillSwitch'} (string list) info.parent = '/org/freedesktop/Hal/devices/platform_dcdbas' (string) info.product = 'Dell WLAN Switch' (string) info.subsystem = 'unknown' (string) info.udi = '/org/freedesktop/Hal/devices/dell_wlan_switch' (string) killswitch.access_method = 'dell' (string) killswitch.type = 'wlan' (string) org.freedesktop.Hal.Device.KillSwitch.method_argnames = {'power', ''} (string list) org.freedesktop.Hal.Device.KillSwitch.method_execpaths = {'hal-system-killswitch-set-power', 'hal-system-killswitch-get-power'} (string list) org.freedesktop.Hal.Device.KillSwitch.method_names = {'SetPower', 'GetPower'} (string list) org.freedesktop.Hal.Device.KillSwitch.method_signatures = {'b', ''} (string list) udi = '/org/freedesktop/Hal/devices/dell_bluetooth_switch' info.capabilities = {'killswitch'} (string list) info.category = 'killswitch' (string) info.interfaces = {'org.freedesktop.Hal.Device.KillSwitch'} (string list) info.parent = '/org/freedesktop/Hal/devices/platform_dcdbas' (string) info.product = 'Dell Bluetooth Switch' (string) info.subsystem = 'unknown' (string) info.udi = '/org/freedesktop/Hal/devices/dell_bluetooth_switch' (string) killswitch.access_method = 'dell' (string) killswitch.type = 'bluetooth' (string) org.freedesktop.Hal.Device.KillSwitch.method_argnames = {'power', ''} (string list) org.freedesktop.Hal.Device.KillSwitch.method_execpaths = {'hal-system-killswitch-set-power', 'hal-system-killswitch-get-power'} (string list) org.freedesktop.Hal.Device.KillSwitch.method_names = {'SetPower', 'GetPower'} (string list) org.freedesktop.Hal.Device.KillSwitch.method_signatures = {'b', ''} (string list) udi = '/org/freedesktop/Hal/devices/platform_bluetooth' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (bluetooth)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_bluetooth' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/bluetooth' (string) platform.id = 'bluetooth' (string) udi = '/org/freedesktop/Hal/devices/platform_bay_0' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (bay.0)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_bay_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/bay.0' (string) platform.id = 'bay.0' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27da' info.linux.driver = 'i801_smbus' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) SMBus Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27da' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 5 (0x5) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3' (string) pci.product = '82801G (ICH7 Family) SMBus Controller' (string) pci.product_id = 10202 (0x27da) (int) pci.subsys_product_id = 460 (0x1cc) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_27c4' info.linux.driver = 'ata_piix' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801GBM/GHM (ICH7 Family) SATA IDE Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c4' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2' (string) pci.device_class = 1 (0x1) (int) pci.device_protocol = 128 (0x80) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2' (string) pci.product = '82801GBM/GHM (ICH7 Family) SATA IDE Controller' (string) pci.product_id = 10180 (0x27c4) (int) pci.subsys_product_id = 460 (0x1cc) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_0' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1' (string) scsi_host.host = 1 (0x1) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_0_scsi_device_lun0' info.linux.driver = 'sr' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_0' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_0_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 1 (0x1) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'DVD+-RW TS-L632D' (string) scsi.target = 0 (0x0) (int) scsi.type = 'cdrom' (string) scsi.vendor = 'TSSTcorp' (string) udi = '/org/freedesktop/Hal/devices/storage_model_DVD__RW_TS_L632D' access_control.file = '/dev/sr0' (string) access_control.type = 'cdrom' (string) block.device = '/dev/sr0' (string) block.is_volume = false (bool) block.major = 11 (0xb) (int) block.minor = 0 (0x0) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_model_DVD__RW_TS_L632D' (string) info.addons = {'hald-addon-storage'} (string list) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'storage', 'block', 'storage.cdrom', 'access_control'} (string list) info.category = 'storage' (string) info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_0_scsi_device_lun0' (string) info.product = 'DVD+-RW TS-L632D' (string) info.udi = '/org/freedesktop/Hal/devices/storage_model_DVD__RW_TS_L632D' (string) info.vendor = 'TSSTcorp' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0' (string) org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list) org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list) org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list) storage.automount_enabled_hint = true (bool) storage.bus = 'scsi' (string) storage.cdrom.bd = false (bool) storage.cdrom.bdr = false (bool) storage.cdrom.bdre = false (bool) storage.cdrom.cdr = true (bool) storage.cdrom.cdrw = true (bool) storage.cdrom.dvd = true (bool) storage.cdrom.dvdplusr = true (bool) storage.cdrom.dvdplusrdl = true (bool) storage.cdrom.dvdplusrw = true (bool) storage.cdrom.dvdplusrwdl = false (bool) storage.cdrom.dvdr = true (bool) storage.cdrom.dvdram = false (bool) storage.cdrom.dvdrw = true (bool) storage.cdrom.hddvd = false (bool) storage.cdrom.hddvdr = false (bool) storage.cdrom.hddvdrw = false (bool) storage.cdrom.mo = false (bool) storage.cdrom.mrw = true (bool) storage.cdrom.mrw_w = true (bool) storage.cdrom.read_speed = 4234 (0x108a) (int) storage.cdrom.support_media_changed = true (bool) storage.cdrom.support_multisession = true (bool) storage.cdrom.write_speed = 0 (0x0) (int) storage.cdrom.write_speeds = {} (string list) storage.drive_type = 'cdrom' (string) storage.firmware_version = 'DE03' (string) storage.hotpluggable = false (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = true (bool) storage.model = 'DVD+-RW TS-L632D' (string) storage.no_partitions_hint = true (bool) storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.partitioning_scheme = '' (string) storage.removable = true (bool) storage.removable.media_available = false (bool) storage.removable.support_async_notification = false (bool) storage.requires_eject = true (bool) storage.size = 0 (0x0) (uint64) storage.vendor = 'TSSTcorp' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_0_scsi_device_lun0_scsi_generic' info.capabilities = {'scsi_generic'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_0_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.subsystem = 'scsi_generic' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_0_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/class/scsi_generic/sg1' (string) scsi_generic.device = '/dev/sg1' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0' (string) scsi_host.host = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_scsi_device_lun0' info.linux.driver = 'sd' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 0 (0x0) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'Hitachi HTS72202' (string) scsi.target = 0 (0x0) (int) scsi.type = 'disk' (string) scsi.vendor = 'ATA' (string) udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_Hitachi_HTS7220070729DP0410DTG2L4HP' block.device = '/dev/sda' (string) block.is_volume = false (bool) block.major = 8 (0x8) (int) block.minor = 0 (0x0) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_Hitachi_HTS7220070729DP0410DTG2L4HP' (string) info.capabilities = {'storage', 'block'} (string list) info.category = 'storage' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_scsi_device_lun0' (string) info.product = 'Hitachi HTS72202' (string) info.udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_Hitachi_HTS7220070729DP0410DTG2L4HP' (string) info.vendor = 'ATA' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda' (string) storage.automount_enabled_hint = true (bool) storage.bus = 'scsi' (string) storage.drive_type = 'disk' (string) storage.firmware_version = 'DC4O' (string) storage.hotpluggable = false (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = false (bool) storage.model = 'Hitachi HTS72202' (string) storage.no_partitions_hint = false (bool) storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.partitioning_scheme = 'mbr' (string) storage.removable = false (bool) storage.removable.media_available = true (bool) storage.removable.media_size = 200049647616 (0x2e93e36000) (uint64) storage.requires_eject = false (bool) storage.serial = 'SATA_Hitachi_HTS7220070729DP0410DTG2L4HP' (string) storage.size = 200049647616 (0x2e93e36000) (uint64) storage.vendor = 'ATA' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_6gDhhg_zQJL_e6FI_l088_7TmL_SX15_ogBenB' block.device = '/dev/dm-0' (string) block.is_volume = true (bool) block.major = 253 (0xfd) (int) block.minor = 0 (0x0) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_Hitachi_HTS7220070729DP0410DTG2L4HP' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_Hitachi_HTS7220070729DP0410DTG2L4HP' (string) info.product = 'Volume (LVM2_member)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_6gDhhg_zQJL_e6FI_l088_7TmL_SX15_ogBenB' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/virtual/block/dm-0' (string) storage.model = '' (string) volume.block_size = 512 (0x200) (int) volume.crypto_luks.clear.backing_volume = '/org/freedesktop/Hal/devices/volume_uuid_5ca29f06_2925_42f5_81b9_4dbf070b5fd5' (string) volume.fstype = 'LVM2_member' (string) volume.fsusage = 'raid' (string) volume.fsversion = 'LVM2 001' (string) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = false (bool) volume.label = '' (string) volume.linux.is_device_mapper = true (bool) volume.mount_point = '' (string) volume.num_blocks = 390314208 (0x1743b8e0) (int) volume.size = 199840874496 (0x2e8771c000) (uint64) volume.uuid = '6gDhhg-zQJL-e6FI-l088-7TmL-SX15-ogBenB' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_5ca29f06_2925_42f5_81b9_4dbf070b5fd5' block.device = '/dev/sda2' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 2 (0x2) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_Hitachi_HTS7220070729DP0410DTG2L4HP' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume.Crypto'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_Hitachi_HTS7220070729DP0410DTG2L4HP' (string) info.product = 'Volume (crypto_LUKS)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_5ca29f06_2925_42f5_81b9_4dbf070b5fd5' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda2' (string) org.freedesktop.Hal.Device.Volume.Crypto.method_argnames = {'passphrase', ''} (string list) org.freedesktop.Hal.Device.Volume.Crypto.method_execpaths = {'hal-luks-setup', 'hal-luks-teardown'} (string list) org.freedesktop.Hal.Device.Volume.Crypto.method_names = {'Setup', 'Teardown'} (string list) org.freedesktop.Hal.Device.Volume.Crypto.method_signatures = {'s', ''} (string list) storage.model = '' (string) volume.block_size = 512 (0x200) (int) volume.fstype = 'crypto_LUKS' (string) volume.fsusage = 'crypto' (string) volume.fsversion = '2' (string) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount_point = '' (string) volume.num_blocks = 390315240 (0x1743bce8) (int) volume.partition.flags = {} (string list) volume.partition.label = '' (string) volume.partition.media_size = 200049647616 (0x2e93e36000) (uint64) volume.partition.number = 2 (0x2) (int) volume.partition.scheme = 'mbr' (string) volume.partition.start = 205632000 (0xc41b200) (uint64) volume.partition.type = '0x8e' (string) volume.partition.uuid = '' (string) volume.size = 199841402880 (0x2e8779d000) (uint64) volume.uuid = '5ca29f06-2925-42f5-81b9-4dbf070b5fd5' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_191b8778_ba96_44ab_8ba4_590776945b6c' block.device = '/dev/sda1' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 1 (0x1) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_Hitachi_HTS7220070729DP0410DTG2L4HP' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_Hitachi_HTS7220070729DP0410DTG2L4HP' (string) info.product = '/boot' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_191b8778_ba96_44ab_8ba4_590776945b6c' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda1' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) storage.model = '' (string) volume.block_size = 512 (0x200) (int) volume.fstype = 'ext3' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '1.0' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '/boot' (string) volume.linux.is_device_mapper = false (bool) volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/boot' (string) volume.num_blocks = 401562 (0x6209a) (int) volume.partition.flags = {'boot'} (string list) volume.partition.label = '' (string) volume.partition.media_size = 200049647616 (0x2e93e36000) (uint64) volume.partition.number = 1 (0x1) (int) volume.partition.scheme = 'mbr' (string) volume.partition.start = 32256 (0x7e00) (uint64) volume.partition.type = '0x83' (string) volume.partition.uuid = '' (string) volume.size = 205599744 (0xc413400) (uint64) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = '191b8778-ba96-44ab-8ba4-590776945b6c' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_scsi_device_lun0_scsi_generic' info.capabilities = {'scsi_generic'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.subsystem = 'scsi_generic' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/class/scsi_generic/sg0' (string) scsi_generic.device = '/dev/sg0' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27b9' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801GBM (ICH7-M) LPC Interface Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27b9' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string) pci.product = '82801GBM (ICH7-M) LPC Interface Bridge' (string) pci.product_id = 10169 (0x27b9) (int) pci.subsys_product_id = 460 (0x1cc) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_2448' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801 Mobile PCI Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_2448' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 1 (0x1) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string) pci.product = '82801 Mobile PCI Bridge' (string) pci.product_id = 9288 (0x2448) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_1217_f7' info.linux.driver = 'firewire_ohci' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string) info.product = 'Firewire (IEEE 1394)' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1217_f7' (string) info.vendor = 'O2 Micro, Inc.' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:01.4' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 16 (0x10) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:01.4' (string) pci.product = 'Firewire (IEEE 1394)' (string) pci.product_id = 247 (0xf7) (int) pci.subsys_product_id = 460 (0x1cc) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'O2 Micro, Inc.' (string) pci.vendor_id = 4631 (0x1217) (int) udi = '/org/freedesktop/Hal/devices/ieee1394_guid474fc00031484961' ieee1394.device = '/dev/fw0' (string) ieee1394.guid = 5138536806912379233 (0x474fc00031484961) (uint64) ieee1394.product = 'Juju' (string) ieee1394.product_id = 1 (0x1) (int) ieee1394.vendor = 'Linux Firewire' (string) ieee1394.vendor_id = 13634846 (0xd00d1e) (int) info.capabilities = {'ieee1394'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_1217_f7' (string) info.subsystem = 'ieee1394' (string) info.udi = '/org/freedesktop/Hal/devices/ieee1394_guid474fc00031484961' (string) linux.device_file = '/dev/fw0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'firewire' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:01.4/fw0' (string) udi = '/org/freedesktop/Hal/devices/pci_1217_7135' info.linux.driver = 'yenta_cardbus' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string) info.product = 'Cardbus bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1217_7135' (string) info.vendor = 'O2 Micro, Inc.' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:01.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 7 (0x7) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:01.0' (string) pci.product = 'Cardbus bridge' (string) pci.product_id = 28981 (0x7135) (int) pci.subsys_product_id = 460 (0x1cc) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'O2 Micro, Inc.' (string) pci.vendor_id = 4631 (0x1217) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_27cc' info.linux.driver = 'ehci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) USB2 EHCI Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27cc' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 32 (0x20) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' (string) pci.product = '82801G (ICH7 Family) USB2 EHCI Controller' (string) pci.product_id = 10188 (0x27cc) (int) pci.subsys_product_id = 460 (0x1cc) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' info.bus = 'usb_device' (string) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27cc' (string) info.product = '2.0 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/001/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 1 (0x1) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 8 (0x8) (int) usb_device.product = '2.0 root hub' (string) usb_device.product_id = 2 (0x2) (int) usb_device.serial = '0000:00:1d.7' (string) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_413c_a005_noserial' info.bus = 'usb_device' (string) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string) info.product = 'Internal 2.0 Hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_a005_noserial' (string) info.vendor = 'Dell Computer Corp.' (string) linux.device_file = '/dev/bus/usb/001/026' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-2' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 2 (0x2) (int) usb_device.device_revision_bcd = 20504 (0x5018) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 26 (0x1a) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-2' (string) usb_device.max_power = 2 (0x2) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 4 (0x4) (int) usb_device.product = 'Internal 2.0 Hub' (string) usb_device.product_id = 40965 (0xa005) (int) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Dell Computer Corp.' (string) usb_device.vendor_id = 16700 (0x413c) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_413c_8128_noserial' info.bus = 'usb_device' (string) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_a005_noserial' (string) info.product = 'Wireless 5700-Sprint Mobile Broadband (CDMA EV-DO) Mini-Card Status Port' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8128_noserial' (string) info.vendor = 'Dell Computer Corp.' (string) linux.device_file = '/dev/bus/usb/001/028' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.2' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 0 (0x0) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 28 (0x1c) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.2' (string) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 2 (0x2) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'Wireless 5700-Sprint Mobile Broadband (CDMA EV-DO) Mini-Card Status Port' (string) usb_device.product_id = 33064 (0x8128) (int) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Dell Computer Corp.' (string) usb_device.vendor_id = 16700 (0x413c) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_413c_8128_noserial_if0' info.bus = 'usb' (string) info.linux.driver = 'option' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_8128_noserial' (string) info.product = 'USB Vendor Specific Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8128_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.2/1-2.2:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 0 (0x0) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 255 (0xff) (int) usb.interface.description = 'Data Interface' (string) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 255 (0xff) (int) usb.interface.subclass = 255 (0xff) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 28 (0x1c) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.2/1-2.2:1.0' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Vendor Specific Interface' (string) usb.product_id = 33064 (0x8128) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'Dell Computer Corp.' (string) usb.vendor_id = 16700 (0x413c) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_413c_8128_noserial_if0_serial_usb_0' info.capabilities = {'serial', 'modem'} (string list) info.category = 'serial' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_8128_noserial_if0' (string) info.product = 'Wireless 5700-Sprint Mobile Broadband (CDMA EV-DO) Mini-Card Status Port' (string) info.subsystem = 'tty' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8128_noserial_if0_serial_usb_0' (string) linux.device_file = '/dev/ttyUSB0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'tty' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.2/1-2.2:1.0/ttyUSB0/tty/ttyUSB0' (string) modem.command_sets = {'IS-707-A'} (string list) serial.device = '/dev/ttyUSB0' (string) serial.originating_device = '/org/freedesktop/Hal/devices/usb_device_413c_8128_noserial_if0' (string) serial.port = 0 (0x0) (int) serial.type = 'usb' (string) udi = '/org/freedesktop/Hal/devices/usb_device_413c_8128_noserial_if1' info.bus = 'usb' (string) info.linux.driver = 'option' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_8128_noserial' (string) info.product = 'USB Vendor Specific Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8128_noserial_if1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.2/1-2.2:1.1' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 0 (0x0) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 255 (0xff) (int) usb.interface.description = 'Data Interface' (string) usb.interface.number = 1 (0x1) (int) usb.interface.protocol = 255 (0xff) (int) usb.interface.subclass = 255 (0xff) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 28 (0x1c) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.2/1-2.2:1.1' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Vendor Specific Interface' (string) usb.product_id = 33064 (0x8128) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'Dell Computer Corp.' (string) usb.vendor_id = 16700 (0x413c) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_413c_8128_noserial_if1_serial_usb_1' info.capabilities = {'serial'} (string list) info.category = 'serial' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_8128_noserial_if1' (string) info.product = 'Wireless 5700-Sprint Mobile Broadband (CDMA EV-DO) Mini-Card Status Port' (string) info.subsystem = 'tty' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8128_noserial_if1_serial_usb_1' (string) linux.device_file = '/dev/ttyUSB1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'tty' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.2/1-2.2:1.1/ttyUSB1/tty/ttyUSB1' (string) serial.device = '/dev/ttyUSB1' (string) serial.originating_device = '/org/freedesktop/Hal/devices/usb_device_413c_8128_noserial_if1' (string) serial.port = 1 (0x1) (int) serial.type = 'usb' (string) udi = '/org/freedesktop/Hal/devices/usb_device_413c_a005_noserial_if0' info.bus = 'usb' (string) info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_a005_noserial' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_a005_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 2 (0x2) (int) usb.device_revision_bcd = 20504 (0x5018) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 2 (0x2) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 26 (0x1a) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0' (string) usb.max_power = 2 (0x2) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 4 (0x4) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 40965 (0xa005) (int) usb.speed = 480.0 (480) (double) usb.vendor = 'Dell Computer Corp.' (string) usb.vendor_id = 16700 (0x413c) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0' info.bus = 'usb' (string) info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 8 (0x8) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 2 (0x2) (int) usb.serial = '0000:00:1d.7' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/pci_8086_27cb' info.linux.driver = 'uhci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) USB UHCI Controller #4' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27cb' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3' (string) pci.product = '82801G (ICH7 Family) USB UHCI Controller #4' (string) pci.product_id = 10187 (0x27cb) (int) pci.subsys_product_id = 460 (0x1cc) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3' info.bus = 'usb_device' (string) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27cb' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/005/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5' (string) usb_device.bus_number = 5 (0x5) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:1d.3' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3_if0' info.bus = 'usb' (string) info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0' (string) usb.bus_number = 5 (0x5) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:1d.3' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_8086_27ca' info.linux.driver = 'uhci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) USB UHCI Controller #3' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27ca' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' (string) pci.product = '82801G (ICH7 Family) USB UHCI Controller #3' (string) pci.product_id = 10186 (0x27ca) (int) pci.subsys_product_id = 460 (0x1cc) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' info.bus = 'usb_device' (string) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27ca' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/004/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4' (string) usb_device.bus_number = 4 (0x4) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:1d.2' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0' info.bus = 'usb' (string) info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0' (string) usb.bus_number = 4 (0x4) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:1d.2' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_8086_27c9' info.linux.driver = 'uhci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) USB UHCI Controller #2' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c9' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' (string) pci.product = '82801G (ICH7 Family) USB UHCI Controller #2' (string) pci.product_id = 10185 (0x27c9) (int) pci.subsys_product_id = 460 (0x1cc) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' info.bus = 'usb_device' (string) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c9' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/003/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3' (string) usb_device.bus_number = 3 (0x3) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:1d.1' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_b97_7761_noserial' info.bus = 'usb_device' (string) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string) info.product = 'Oz776 1.1 Hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_b97_7761_noserial' (string) info.vendor = 'O2 Micro, Inc.' (string) linux.device_file = '/dev/bus/usb/003/020' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1' (string) usb_device.bus_number = 3 (0x3) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 272 (0x110) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 20 (0x14) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1' (string) usb_device.max_power = 200 (0xc8) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 3 (0x3) (int) usb_device.product = 'Oz776 1.1 Hub' (string) usb_device.product_id = 30561 (0x7761) (int) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'O2 Micro, Inc.' (string) usb_device.vendor_id = 2967 (0xb97) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_b97_7762_noserial' info.bus = 'usb_device' (string) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_b97_7761_noserial' (string) info.product = 'Oz776 SmartCard Reader' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_b97_7762_noserial' (string) info.vendor = 'O2 Micro, Inc.' (string) linux.device_file = '/dev/bus/usb/003/022' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.2' (string) usb_device.bus_number = 3 (0x3) (int) usb_device.can_wake_up = false (bool) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 272 (0x110) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 22 (0x16) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.2' (string) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'Oz776 SmartCard Reader' (string) usb_device.product_id = 30562 (0x7762) (int) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'O2 Micro, Inc.' (string) usb_device.vendor_id = 2967 (0xb97) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_b97_7762_noserial_if0' info.bus = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_b97_7762_noserial' (string) info.product = 'USB Chip/Smartcard Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_b97_7762_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.2/3-1.2:1.0' (string) usb.bus_number = 3 (0x3) (int) usb.can_wake_up = false (bool) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 272 (0x110) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 11 (0xb) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 22 (0x16) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.2/3-1.2:1.0' (string) usb.num_configurations = 1 (0x1) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Chip/Smartcard Interface' (string) usb.product_id = 30562 (0x7762) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'O2 Micro, Inc.' (string) usb.vendor_id = 2967 (0xb97) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_483_2016_noserial' access_control.file = '/dev/bus/usb/003/021' (string) access_control.type = 'thinkfinger' (string) info.bus = 'usb_device' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'access_control'} (string list) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_b97_7761_noserial' (string) info.product = 'Fingerprint Reader' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_483_2016_noserial' (string) info.vendor = 'SGS Thomson Microelectronics' (string) linux.device_file = '/dev/bus/usb/003/021' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1' (string) usb_device.bus_number = 3 (0x3) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 1 (0x1) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 21 (0x15) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1' (string) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'Fingerprint Reader' (string) usb_device.product_id = 8214 (0x2016) (int) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'SGS Thomson Microelectronics' (string) usb_device.vendor_id = 1155 (0x483) (int) usb_device.version = 1.0 (1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_483_2016_noserial_if0' info.bus = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_483_2016_noserial' (string) info.product = 'USB Vendor Specific Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_483_2016_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1/3-1.1:1.0' (string) usb.bus_number = 3 (0x3) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 1 (0x1) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 255 (0xff) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 21 (0x15) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1/3-1.1:1.0' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Vendor Specific Interface' (string) usb.product_id = 8214 (0x2016) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'SGS Thomson Microelectronics' (string) usb.vendor_id = 1155 (0x483) (int) usb.version = 1.0 (1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_ffffffff_ffffffff_noserial' info.bus = 'usb' (string) info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_b97_7761_noserial' (string) info.product = 'USB Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_ffffffff_ffffffff_noserial' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0' (string) usb.bus_number = 3 (0x3) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 272 (0x110) (int) usb.device_subclass = 0 (0x0) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 20 (0x14) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0' (string) usb.max_power = 200 (0xc8) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 3 (0x3) (int) usb.product = 'USB Interface' (string) usb.product_id = 30561 (0x7761) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'O2 Micro, Inc.' (string) usb.vendor_id = 2967 (0xb97) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0' info.bus = 'usb' (string) info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0' (string) usb.bus_number = 3 (0x3) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:1d.1' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_8086_27c8' info.linux.driver = 'uhci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) USB UHCI Controller #1' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c8' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string) pci.product = '82801G (ICH7 Family) USB UHCI Controller #1' (string) pci.product_id = 10184 (0x27c8) (int) pci.subsys_product_id = 460 (0x1cc) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' info.bus = 'usb_device' (string) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c8' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/002/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2' (string) usb_device.bus_number = 2 (0x2) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:1d.0' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0' info.bus = 'usb' (string) info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:1d.0' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_8086_27d6' info.linux.driver = 'pcieport-driver' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) PCI Express Port 4' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d6' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.3' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.3' (string) pci.product = '82801G (ICH7 Family) PCI Express Port 4' (string) pci.product_id = 10198 (0x27d6) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_27d4' info.linux.driver = 'pcieport-driver' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) PCI Express Port 3' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d4' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2' (string) pci.product = '82801G (ICH7 Family) PCI Express Port 3' (string) pci.product_id = 10196 (0x27d4) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_14e4_1600' info.linux.driver = 'tg3' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d4' (string) info.product = 'NetXtreme BCM5752 Gigabit Ethernet PCI Express' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_14e4_1600' (string) info.vendor = 'Broadcom Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2/0000:09:00.0' (string) pci.device_class = 2 (0x2) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2/0000:09:00.0' (string) pci.product = 'NetXtreme BCM5752 Gigabit Ethernet PCI Express' (string) pci.product_id = 5632 (0x1600) (int) pci.subsys_product_id = 460 (0x1cc) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'Broadcom Corporation' (string) pci.vendor_id = 5348 (0x14e4) (int) udi = '/org/freedesktop/Hal/devices/net_00_19_b9_59_da_5a' info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list) info.category = 'net.80203' (string) info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_14e4_1600' (string) info.product = 'Networking Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_19_b9_59_da_5a' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2/0000:09:00.0/net/eth0' (string) net.80203.mac_address = 110483855962 (0x19b959da5a) (uint64) net.address = '00:19:b9:59:da:5a' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.interface = 'eth0' (string) net.linux.ifindex = 2 (0x2) (int) net.originating_device = '/org/freedesktop/Hal/devices/pci_14e4_1600' (string) net.physical_device = '/org/freedesktop/Hal/devices/pci_14e4_1600' (string) org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list) udi = '/org/freedesktop/Hal/devices/pci_8086_27d2' info.linux.driver = 'pcieport-driver' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) PCI Express Port 2' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d2' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1' (string) pci.product = '82801G (ICH7 Family) PCI Express Port 2' (string) pci.product_id = 10194 (0x27d2) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_4222' info.linux.driver = 'iwl3945' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d2' (string) info.product = 'PRO/Wireless 3945ABG Network Connection' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_4222' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0' (string) pci.device_class = 2 (0x2) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 128 (0x80) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0' (string) pci.product = 'PRO/Wireless 3945ABG Network Connection' (string) pci.product_id = 16930 (0x4222) (int) pci.subsys_product_id = 4128 (0x1020) (int) pci.subsys_vendor = 'Intel Corporation' (string) pci.subsys_vendor_id = 32902 (0x8086) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/net_00_19_d2_7a_23_fc_0' info.capabilities = {'net', 'net.80211'} (string list) info.category = 'net.80211' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_4222' (string) info.product = 'WLAN Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_19_d2_7a_23_fc_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/net/wlan0' (string) net.80211.mac_address = 110905402364 (0x19d27a23fc) (uint64) net.address = '00:19:d2:7a:23:fc' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.interface = 'wlan0' (string) net.linux.ifindex = 36 (0x24) (int) net.originating_device = '/org/freedesktop/Hal/devices/pci_8086_4222' (string) net.physical_device = '/org/freedesktop/Hal/devices/pci_8086_4222' (string) udi = '/org/freedesktop/Hal/devices/net_00_19_d2_7a_23_fc' info.capabilities = {'net', 'net.80211control'} (string list) info.category = 'net.80211control' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_4222' (string) info.product = 'Networking Wireless Control Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_19_d2_7a_23_fc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/net/wmaster0' (string) net.address = '00:19:d2:7a:23:fc' (string) net.arp_proto_hw_id = 801 (0x321) (int) net.interface = 'wmaster0' (string) net.linux.ifindex = 35 (0x23) (int) net.originating_device = '/org/freedesktop/Hal/devices/pci_8086_4222' (string) net.physical_device = '/org/freedesktop/Hal/devices/pci_8086_4222' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27d0' info.linux.driver = 'pcieport-driver' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) PCI Express Port 1' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d0' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0' (string) pci.product = '82801G (ICH7 Family) PCI Express Port 1' (string) pci.product_id = 10192 (0x27d0) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8' info.linux.driver = 'HDA Intel' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) High Definition Audio Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0' (string) pci.device_class = 4 (0x4) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0' (string) pci.product = '82801G (ICH7 Family) High Definition Audio Controller' (string) pci.product_id = 10200 (0x27d8) (int) pci.subsys_product_id = 460 (0x1cc) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' info.capabilities = {'sound'} (string list) info.category = 'sound' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string) info.product = 'HDA Intel Sound Card' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0' (string) sound.card = 0 (0x0) (int) sound.card_id = 'HDA Intel' (string) sound.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_playback_1' access_control.file = '/dev/snd/pcmC0D1p' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA Intel' (string) alsa.device = 1 (0x1) (int) alsa.device_file = '/dev/snd/pcmC0D1p' (string) alsa.device_id = 'STAC92xx Digital' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'playback' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) info.product = 'STAC92xx Digital ALSA Playback Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_playback_1' (string) linux.device_file = '/dev/snd/pcmC0D1p' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D1p' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_playback_0' access_control.file = '/dev/snd/pcmC0D0p' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA Intel' (string) alsa.device = 0 (0x0) (int) alsa.device_file = '/dev/snd/pcmC0D0p' (string) alsa.device_id = 'STAC92xx Analog' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'playback' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) info.product = 'STAC92xx Analog ALSA Playback Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_playback_0' (string) linux.device_file = '/dev/snd/pcmC0D0p' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D0p' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_capture_0' access_control.file = '/dev/snd/pcmC0D0c' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA Intel' (string) alsa.device = 0 (0x0) (int) alsa.device_file = '/dev/snd/pcmC0D0c' (string) alsa.device_id = 'STAC92xx Analog' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'capture' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) info.product = 'STAC92xx Analog ALSA Capture Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_capture_0' (string) linux.device_file = '/dev/snd/pcmC0D0c' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D0c' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_mixer__1' access_control.file = '/dev/mixer' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) info.product = 'STAC92xx Analog OSS Control Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_mixer__1' (string) linux.device_file = '/dev/mixer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/mixer' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA Intel' (string) oss.device_file = '/dev/mixer' (string) oss.device_id = 'STAC92xx Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) oss.type = 'mixer' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_hw_specific_0' access_control.file = '/dev/snd/hwC0D0' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA Intel' (string) alsa.device = 0 (0x0) (int) alsa.device_file = '/dev/snd/hwC0D0' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) alsa.type = 'hw_specific' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) info.product = 'HDA Intel ALSA hardware specific Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_hw_specific_0' (string) linux.device_file = '/dev/snd/hwC0D0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_0_0' access_control.file = '/dev/dsp' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) info.product = 'STAC92xx Analog OSS PCM Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_0_0' (string) linux.device_file = '/dev/dsp' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/dsp' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA Intel' (string) oss.device = 0 (0x0) (int) oss.device_file = '/dev/dsp' (string) oss.device_id = 'STAC92xx Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_control__1' access_control.file = '/dev/snd/controlC0' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA Intel' (string) alsa.device_file = '/dev/snd/controlC0' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) alsa.type = 'control' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) info.product = 'HDA Intel ALSA Control Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_control__1' (string) linux.device_file = '/dev/snd/controlC0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/controlC0' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_0' access_control.file = '/dev/audio' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) info.product = 'STAC92xx Analog OSS PCM Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_0' (string) linux.device_file = '/dev/audio' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/audio' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA Intel' (string) oss.device = 0 (0x0) (int) oss.device_file = '/dev/audio' (string) oss.device_id = 'STAC92xx Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_1' access_control.file = '/dev/adsp' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) info.product = 'STAC92xx Analog OSS PCM Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_1' (string) linux.device_file = '/dev/adsp' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/adsp' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA Intel' (string) oss.device = 1 (0x1) (int) oss.device_file = '/dev/adsp' (string) oss.device_id = 'STAC92xx Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27a6' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27a6' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1' (string) pci.device_class = 3 (0x3) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 128 (0x80) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1' (string) pci.product = 'Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller' (string) pci.product_id = 10150 (0x27a6) (int) pci.subsys_product_id = 460 (0x1cc) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_27a2' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27a2' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' (string) pci.device_class = 3 (0x3) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' (string) pci.product = 'Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller' (string) pci.product_id = 10146 (0x27a2) (int) pci.subsys_product_id = 460 (0x1cc) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_27a2_drm_i915_card0' drm.dri_library = 'i915' (string) info.capabilities = {'drm'} (string list) info.category = 'drm' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27a2' (string) info.product = 'Direct Rendering Manager Device' (string) info.subsystem = 'drm' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27a2_drm_i915_card0' (string) info.vendor = 'Intel Corporation' (string) linux.device_file = '/dev/dri/card0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'drm' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/drm/card0' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27a0' info.linux.driver = 'agpgart-intel' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27a0' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string) pci.product = 'Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub' (string) pci.product_id = 10144 (0x27a0) (int) pci.subsys_product_id = 460 (0x1cc) (int) pci.subsys_vendor = 'Dell' (string) pci.subsys_vendor_id = 4136 (0x1028) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) Dumped 121 device(s) from the Global Device List. ------------------------------------------------